Items: 0
Total: £0.00
Please note: If your cover is shaped for example 'L' shape, 'T' shape or perhaps is a back cushion that fits over the arm of the sofa, it is preferable to either send us your cushion covers to us to measure, quote and fill them with new foam, or send us a cushion template or accurate diagram/sketch.
Take the existing filling out of the cushion cover. It may be a feather, foam or fibre (sometimes known as hollow fibre).
Lay the cover on a flat surface. Do not over stretch the cover just gently stretch it so the creases are not visible. If your cover has a piped edge on the top and bottom you will need to take the measurements from between the INSIDE the piped edges. If the cover has a plain seamed edge with no piping please measure seam to seam.
| Please measure the following: - A: The width from side to side of the cover. If the cushion is tapered i.e. wider at the front and narrower at the back you will need to take the two measurements, one at the front from side to side and one at the back from side to side. Add 0.5” to the width measurement - for example if the width is 24” (61cm) you need a 24.5” cushion | ![]() |
| B: The length from front to back of the cover (or height top to bottom if it is a back cushion) Add 0.5" to the length measurement- for example if the length is 27.5" (70cm) you need a 28" cushion | ![]() |
| C: The depth (height) of the cushion border This measurement is very important Try to be as accurate as possible with this. Add 1" to the depth measurement - for example if the depth is 5" (13cm) you need a 6" cushion | ![]() |
When you have your measurements: - EITHER
© 2012 Comfort Solutions